Page 116 - Diastar - Catalogue 2
P. 116
ACADABRA edge working tools
supreme
FEATURES
• Polish equally well on natural stone, engineered stone, bull nose, flat, bevel
• no need to change wheel’s type
• long life & good finish
ADVANTAGES
• Life of position 1 and 2 is presently 8 to 10 times the life of the best bricks. Resimetal is even longer, almost twice
• No need to change wheels for bull nose, flat, natural, engineered granite.
• These wheels work well on all shapes and all materials, natural or engineered, , and from very soft to very hard (Ruby
Red) granites
TIPS
• It is not necessary to “double up” from 200 to 400 to 800 etc. Customers have used 600 to 1500 or used 1800 instead of
1500, it really matters very little. The wheels are very aggressive, but still give a very good finish.
• Position 1 wheels: a coarse 60/80 mesh wheel works best as it removes completely the lines LT by the metal bond shap-
ing wheel. Keep the pressure low for better finish and much longer life. Using pressure higher than 2 will cause wheel
marks that the next wheel will have problems removing
• Finish: the conventional brick LUX gives the best finish on the last position on natural dark granite colors.
Engineered Stone: 60/80, 100, 200, 400, 600, 1500 (no LUX), speed 40 or 45cm/min.
The finish on engineered material is good enough on all materials except Space Black, where the LUX is better.
On space black reduce speed to 35 and use a LUX brick.
• Shape of bull nose: if the bull nose comes out “pointed” that is because the pos. 1 wheel stays too long on the stone and
cuts too much. The solution is to go faster
• Position 1 leaves wheel marks: too much pressure
• Polish not shiny enough ( does not match top): need BUFF wheels. Best is a iGLOO BLACK BUFF for natural granite, a
iGLOO WHITE BUFF for engineered granite and for marble.
MACHINES
• Tested and approved for: Comandulli, CMG, CMPI, Montresor, Marmo meccanica, GMM-Cemar, Sassomeccanica, Park
Industries
B14
supreme
FEATURES
• Polish equally well on natural stone, engineered stone, bull nose, flat, bevel
• no need to change wheel’s type
• long life & good finish
ADVANTAGES
• Life of position 1 and 2 is presently 8 to 10 times the life of the best bricks. Resimetal is even longer, almost twice
• No need to change wheels for bull nose, flat, natural, engineered granite.
• These wheels work well on all shapes and all materials, natural or engineered, , and from very soft to very hard (Ruby
Red) granites
TIPS
• It is not necessary to “double up” from 200 to 400 to 800 etc. Customers have used 600 to 1500 or used 1800 instead of
1500, it really matters very little. The wheels are very aggressive, but still give a very good finish.
• Position 1 wheels: a coarse 60/80 mesh wheel works best as it removes completely the lines LT by the metal bond shap-
ing wheel. Keep the pressure low for better finish and much longer life. Using pressure higher than 2 will cause wheel
marks that the next wheel will have problems removing
• Finish: the conventional brick LUX gives the best finish on the last position on natural dark granite colors.
Engineered Stone: 60/80, 100, 200, 400, 600, 1500 (no LUX), speed 40 or 45cm/min.
The finish on engineered material is good enough on all materials except Space Black, where the LUX is better.
On space black reduce speed to 35 and use a LUX brick.
• Shape of bull nose: if the bull nose comes out “pointed” that is because the pos. 1 wheel stays too long on the stone and
cuts too much. The solution is to go faster
• Position 1 leaves wheel marks: too much pressure
• Polish not shiny enough ( does not match top): need BUFF wheels. Best is a iGLOO BLACK BUFF for natural granite, a
iGLOO WHITE BUFF for engineered granite and for marble.
MACHINES
• Tested and approved for: Comandulli, CMG, CMPI, Montresor, Marmo meccanica, GMM-Cemar, Sassomeccanica, Park
Industries
B14
